Edge Functionalization of Bulk γ-Graphyne Facilitates Mechanical Exfoliation and Modulates the Mode of Sheet Stacking.

We have successfully achieved selective and efficient functionalization of sheet edges in microcrystalline multilayer γ-graphyne through two methods: cross-coupling with residual bromide edge groups and copper-catalyzed azide-alkyne cycloaddition (CuAAC) with edge terminal alkyne groups. This modification significantly enhances the ease of mechanical exfoliation and dispersibility of the sheets of γ-graphyne. Specifically, C18-grafted γ-graphyne forms stable dispersions in compatible organic solvents, allowing for the imaging of atomically thin layers of γ-graphyne for the first time. Additionally, we have discovered that phenylacetylide edge groups alter the preferred stacking mode of γ-graphyne sheets. Few-layer flakes of Ph-edge γ-graphyne exhibit a preference for the R3m space group, contrasting with the aperiodic stacking of Br-edge γ-graphyne. These results open the door for scalable exfoliation of few-layer flakes of γ-graphyne with a high aspect ratio, enabling potential applications in carbon electronics.

Bone-level Tapered Implants for Single Tooth Replacement. Immediate vs Delayed Placement: A Randomized, Controlled, Multi-center One-year No-inferiority Clinical Study.

MATERIALS AND METHODS: Post-market, prospective, randomized, controlled, multi-center study with a primary endpoint of one year. 53 subjects were randomized to receive either immediate implant placement (test group) or delayed implant placement (control group). The mean crestal bone-level changes from implant loading to 12 months post-implant loading were measured using standardized, digital periapical radiographs. Changes in facial plate thickness measured on cone-beam computed tomography (CBCT) images, implant success and survival, implant stability, soft tissue changes, patient-centered outcomes, and adverse effects were measured to assess outcomes between the test and control treatments at 12 months post-loading. RESULTS: 46 subjects completed the study (23 in each group). Mean bone changes from loading to the 12 month follow-up were recorded with no statistically significant difference (p=0.950) between both groups. The hypothesis was confirmed that immediate implant placement (Test) in extraction sockets is similar to delayed placement (Control). The test group was found to be similar to the control group (P=0.022) in terms of mean changes in facial plate thickness. Implant survival and success were 95.8% in the test group and 92% in the control group. Stability in the control group was superior at the time of surgery, but there was no difference between both groups at implant loading, producing a non-significant p-value of (0.563). CONCLUSION: This randomized, controlled, multi-center one-year study showed comparable outcomes 1-year after prosthetic loading in the immediate and delayed placement groups.

In silico methods for immunogenicity risk assessment and human homology screening for therapeutic antibodies.

In silico immunogenicity risk assessment has been an important step in the development path for many biologic therapeutics, including monoclonal antibodies. Even if the source of a given biologic is 'fully human', T cell epitopes that are contained in the sequences of the biologic may activate the immune system, enabling the development of anti-drug antibodies that can reduce drug efficacy and may contribute to adverse events. Computational tools that identify T cell epitopes from primary amino acid sequences have been used to assess the immunogenic potential of therapeutic candidates for several decades. To facilitate larger scale analyses and accelerate preclinical immunogenicity risk assessment, our group developed an integrated web-based platform called ISPRI, (Immunogenicity Screening and Protein Re-engineering Interface) that provides hands-on access through a secure web-based interface for scientists working in large and mid-sized biotech companies in the US, Europe, and Japan. This toolkit has evolved and now contains an array of algorithms that can be used individually and/or consecutively for immunogenicity assessment and protein engineering. Most analyses start with the advanced epitope mapping tool (EpiMatrix), then proceed to identify epitope clusters using ClustiMer, and then use a tool called JanusMatrix to define whether any of the T cell epitope clusters may generate a regulatory T cell response which may diminish or eliminate anti-drug antibody formation. Candidates can be compared to similar products on a normalized immunogenicity scale. Should modifications to the biologic sequence be an option, a tool for moderating putative immunogenicity by editing T cell epitopes out of the sequence is available (OptiMatrix). Although this perspective discusses the in-silico immunogenicity risk assessment for monoclonal antibodies, bi-specifics, multi-specifics, and antibody-drug conjugates, the analysis of additional therapeutic modalities such as enzyme replacement proteins, blood factor proteins, CAR-T, gene therapy products, and peptide drugs is also made available on the ISPRI platform.

ISPRI (Interactive Screening and Protein Reengineering Interface): Integrated, cloud-based, comprehensive toolkit for Immunogenicity Risk Assessment.EpiMatrix Immunogenicity Score: Combined T effector and Treg Epitope Content per unit protein.Tregitopes: Treg Epitopes found in IgG Framework that have been shown to modulate antigen-specific effector T cell responses.ClustiMer: Tool for identifying epitope rich polypeptides from within a given protein sequence.JanusMatrix: Tool for Predicting Tolerance, Putative Treg Epitopes, and Anti-self-immune responses.OptiMatrix: Tool for modifying T cell epitope sequences to reduce (or enhance) MHC binding.

Ferredoxin reduction by hydrogen with iron functions as an evolutionary precursor of flavin-based electron bifurcation.

Autotrophic theories for the origin of metabolism posit that the first cells satisfied their carbon needs from CO2 and were chemolithoautotrophs that obtained their energy and electrons from H2. The acetyl-CoA pathway of CO2 fixation is central to that view because of its antiquity: Among known CO2 fixing pathways it is the only one that is i) exergonic, ii) occurs in both bacteria and archaea, and iii) can be functionally replaced in full by single transition metal catalysts in vitro. In order to operate in cells at a pH close to 7, however, the acetyl-CoA pathway requires complex multi-enzyme systems capable of flavin-based electron bifurcation that reduce low potential ferredoxin-the physiological donor of electrons in the acetyl-CoA pathway-with electrons from H2. How can the acetyl-CoA pathway be primordial if it requires flavin-based electron bifurcation? Here, we show that native iron (Fe0), but not Ni0, Co0, Mo0, NiFe, Ni2Fe, Ni3Fe, or Fe3O4, promotes the H2-dependent reduction of aqueous Clostridium pasteurianum ferredoxin at pH 8.5 or higher within a few hours at 40 °C, providing the physiological function of flavin-based electron bifurcation, but without the help of enzymes or organic redox cofactors. H2-dependent ferredoxin reduction by iron ties primordial ferredoxin reduction and early metabolic evolution to a chemical process in the Earth's crust promoted by solid-state iron, a metal that is still deposited in serpentinizing hydrothermal vents today.

Cryptic diversity of cellulose-degrading gut bacteria in industrialized humans.

Humans, like all mammals, depend on the gut microbiome for digestion of cellulose, the main component of plant fiber. However, evidence for cellulose fermentation in the human gut is scarce. We have identified ruminococcal species in the gut microbiota of human populations that assemble functional multienzymatic cellulosome structures capable of degrading plant cell wall polysaccharides. One of these species, which is strongly associated with humans, likely originated in the ruminant gut and was subsequently transferred to the human gut, potentially during domestication where it underwent diversification and diet-related adaptation through the acquisition of genes from other gut microbes. Collectively, these species are abundant and widespread among ancient humans, hunter-gatherers, and rural populations but are rare in populations from industrialized societies thus indicating potential disappearance in response to the westernized lifestyle.

Flexural properties and fatigue limit of 3D-printed and milled resin-based materials.

PURPOSE: The purpose of this study was to evaluate the flexural strength (FS), flexural modulus (FM), and fatigue limit (FL) of 3D-printed resin-based polymers and composites and compare them to 3D-printed composites. MATERIALS AND METHODS: A bar-shaped specimen (25 × 2 × 2 mm) was CAD designed according to ISO 4049:2019, and 60 duplicates of the 3D model were nested at a 45-degree angle with the printing platform and 3D-printed with three materials: denture teeth resin (Denture Teeth, Formlabs), temporary crown and bridge resin (Temporary CB, Formlabs), and composite (Flexcera Smile Ultra+, Desktop Health). The 3D model was also imported into a dental CAM software, duplicated 60 times, nested, and milled from a 3D-milled composite puck (Ivotion Denture Teeth, Ivoclar). All specimens were post-processed following the manufacturer's recommendation. The specimens were then subjected to a three-point bending test until failure using a Universal Testing Machine at a crosshead speed of 0.75 mm/min, and FS and FM were calculated. The remaining thirty specimens were tested for Fatigue Limit using the staircase approach starting at 50% FS maximum up to 1.2 M cycles at 10 Hz. The data were analyzed using one-way ANOVA and the Weibull distribution (α = 0.05). RESULTS: The results showed that Ivotion and Flexcera had higher FS (110.3 ± 7.1 MPa and 107.6 ± 6.4 MPa, respectively) and FM (3.3 ± 0.1 GPa and 3.0 ± 0.2 GPa, respectively) compared to the 3D-printed Denture Teeth (FS = 66.4 ± 18.5 MPa and FM = 1.8 ± 0.1 GPa) and Temporary CB (FS = 79.6 ± 12.1 MPa and FM = 2.7 ± 0.4 GPa). Weibull analysis showed that the Ivotion and Flexcera had a more uniform and narrower spatial distribution of defects (m: 27.98 and 29.19) than the printed materials, which had m values of 8.17 and 4.11 for Temporary CB and Denture Teeth, respectively. Although no differences were found in the static properties (FS and FM) between Ivotion and Flexcera, Ivotion presented a higher endurance limit than Flexcera (51.43 vs. 40.95 MPa). The Temporary CB presented 21.08 MPa and Denture Teeth presented 17.80 MPa of endurance limit. CONCLUSIONS: 3D-milled (Ivotion Denture Teeth) and 3D-printed (Flexcera Smile Ultra+) composites outperformed 3D-printed resins (Formlabs Denture Teeth and Temporary Crown & Bridge) in terms of flexural properties and fatigue resistance. 3D-milled (Ivotion) and 3D-printed (Flexcera) composites exhibited similar flexural properties, but 3D-milled composites showed a 25% higher fatigue endurance limit, suggesting improved clinical longevity.

Effect of proline content and histidine ligation on the dynamics of Ω-loop D and the peroxidase activity of iso-1-cytochrome c.

To study how proline residues affect the dynamics of Ω-loop D (residues 70 to 85) of cytochrome c, we prepared G83P and G83A variants of yeast iso-1-cytochrome c (iso-1-Cytc) in the presence and absence of a K73H mutation. Ω-loop D is important in controlling both the electron transfer function of Cytc and the peroxidase activity of Cytc used in apoptosis because it provides the Met80 heme ligand. The G83P and G83A mutations have no effect on the global stability of iso-1-Cytc in presence or absence of the K73H mutation. However, both mutations destabilize the His73-mediated alkaline conformer relative to the native state. pH jump stopped-flow experiments show that the dynamics of the His73-mediated alkaline transition are significantly enhanced by the G83P mutation. Gated electron transfer studies show that the enhanced dynamics result from an increased rate of return to the native state, whereas the rate of loss of Met80 ligation is unchanged by the G83P mutation. Thus, the G83P substitution does not stiffen the conformation of the native state. Because bis-His heme ligation occurs when Cytc binds to cardiolipin-containing membranes, we studied the effect of His73 ligation on the peroxidase activity of Cytc, which acts as an early signal in apoptosis by causing oxygenation of cardiolipin. We find that the His73 alkaline conformer suppresses the peroxidase activity of Cytc. Thus, the bis-His ligated state of Cytc formed upon binding to cardiolipin is a negative effector for the peroxidase activity of Cytc early in apoptosis.

Neoadjuvant personalized cancer vaccines: the final frontier?

INTRODUCTION: Clinical trials of personalized cancer vaccines have shown that on-demand therapies that are manufactured for each patient, result in activated T cell responses against individual tumor neoantigens. However, their use has been traditionally restricted to adjuvant settings and late-stage cancer therapy. There is growing support for the implementation of PCV earlier in the cancer therapy timeline, for reasons that will be discussed in this review. AREAS COVERED: The efficacy of cancer vaccines may be to some extent dependent on treatment(s) given prior to vaccine administration. Tumors can undergo radical immunoediting following treatment with immunotherapies, such as checkpoint inhibitors, which may affect the presence of the very mutations targeted by cancer vaccines. This review will cover the topics of neoantigen cancer vaccines, tumor immunoediting, and therapy timing. EXPERT OPINION: Therapy timing remains a critical topic to address in optimizing the efficacy of personalized cancer vaccines. Most personalized cancer vaccines are being evaluated in late-stage cancer patients and after treatment with checkpoint inhibitors, but they may offer a greater benefit to the patient if administered in earlier clinical settings, such as the neoadjuvant setting, where patients are not facing T cell exhaustion and/or a further compromised immune system.

The anticancer/cytotoxic effect of a novel gallic acid derivative in non-small cell lung carcinoma A549 cells and peripheral blood mononuclear cells from healthy individuals and lung cancer patients.

Gallic acid (GA) is a naturally occurring polyphenol with a strong antioxidant capacity. GA stimulates the apoptosis of cancer cells, thereby suppressing cancer cell invasion. However, the low oral permeability of GA limits its therapeutic use. In order to enhance the antioxidant capacity and oral permeability of GA, a series of compounds analogous to GA were synthesized: 4-methoxybenzenesulfonamide (MBS), 3,4-dimethoxybenzenesulfonamide (DMBS) and 3,4,5-trimethoxybenzenesulfonamide (TMBS). In the new compounds, hydroxyl groups were replaced with various numbers of methoxy groups (stronger electron-donating groups), to increase hydrophobicity and oral permeability compared to GA. In addition, the carboxylic group was replaced with a sulfonyl group (a stronger electron-withdrawing group), to increase the molecular polarity and antioxidative activities of the compounds. The cell counting kit-8 (CCK-8) assay was used to detect the effect of GA, MBS, DMBS, and TMBS on cell proliferation and apoptosis in peripheral blood mononuclear cells (PBMCs) from healthy individuals and non-small cell lung carcinoma A549 cells. Additionally, the comet assay was used to assess the genotoxicity of these compounds in PBMCs from healthy individuals, lung cancer patients, and A549 cells. Compared to untreated cells, TMBS reduced DNA damage more effectively than GA in PBMCs from lung cancer patients and healthy donors. Furthermore, in comparison to GA, TMBS was more cytotoxic in A549 cells. Moreover, TMBS was not cytotoxic in healthy PBMCs, suggesting that TMBS demonstrates therapeutic potential in cancer.

Indoximod-based chemo-immunotherapy for pediatric brain tumors: A first-in-children phase I trial.

BACKGROUND: Recurrent brain tumors are the leading cause of cancer death in children. Indoleamine 2,3-dioxygenase (IDO) is a targetable metabolic checkpoint that, in preclinical models, inhibits anti-tumor immunity following chemotherapy. METHODS: We conducted a phase I trial (NCT02502708) of the oral IDO-pathway inhibitor indoximod in children with recurrent brain tumors or newly diagnosed diffuse intrinsic pontine glioma (DIPG). Separate dose-finding arms were performed for indoximod in combination with oral temozolomide (200 mg/m2/day x 5 days in 28-day cycles), or with palliative conformal radiation. Blood samples were collected at baseline and monthly for single-cell RNA-sequencing with paired single-cell T cell receptor sequencing. RESULTS: Eighty-one patients were treated with indoximod-based combination therapy. Median follow-up was 52 months (range 39-77 months). Maximum tolerated dose was not reached, and the pediatric dose of indoximod was determined as 19.2 mg/kg/dose, twice daily. Median overall survival was 13.3 months (n = 68, range 0.2-62.7) for all patients with recurrent disease and 14.4 months (n = 13, range 4.7-29.7) for DIPG. The subset of n = 26 patients who showed evidence of objective response (even a partial or mixed response) had over 3-fold longer median OS (25.2 months, range 5.4-61.9, p = 0.006) compared to n = 37 nonresponders (7.3 months, range 0.2-62.7). Four patients remain free of active disease longer than 36 months. Single-cell sequencing confirmed emergence of new circulating CD8 T cell clonotypes with late effector phenotype. CONCLUSIONS: Indoximod was well tolerated and could be safely combined with chemotherapy and radiation. Encouraging preliminary evidence of efficacy supports advancing to Phase II/III trials for pediatric brain tumors.

Optimization of therapeutic antibodies for reduced self-association and non-specific binding via interpretable machine learning.

Antibody development, delivery, and efficacy are influenced by antibody-antigen affinity interactions, off-target interactions that reduce antibody bioavailability and pharmacokinetics, and repulsive self-interactions that increase the stability of concentrated antibody formulations and reduce their corresponding viscosity. Yet identifying antibody variants with optimal combinations of these three types of interactions is challenging. Here we show that interpretable machine-learning classifiers, leveraging antibody structural features descriptive of their variable regions and trained on experimental data for a panel of 80 clinical-stage monoclonal antibodies, can identify antibodies with optimal combinations of low off-target binding in a common physiological-solution condition and low self-association in a common antibody-formulation condition. For three clinical-stage antibodies with suboptimal combinations of off-target binding and self-association, the classifiers predicted variable-region mutations that optimized non-affinity interactions while maintaining high-affinity antibody-antigen interactions. Interpretable machine-learning models may facilitate the optimization of antibody candidates for therapeutic applications.

A Systems Nephrology Approach to Diabetic Kidney Disease Research and Practice.

BACKGROUND: Diagnosis and staging of diabetic kidney disease (DKD) via the serial assessment of routine laboratory indices lacks the granularity required to resolve the heterogeneous disease mechanisms driving progression in the individual patient. A systems nephrology approach may help resolve mechanisms underlying this clinically apparent heterogeneity, paving a way for targeted treatment of DKD. SUMMARY: Given the limited access to kidney tissue in routine clinical care of patients with DKD, data derived from renal tissue in preclinical model systems, including animal and in vitro models, can play a central role in the development of a targeted systems-based approach to DKD. Multi-centre prospective cohort studies, including the Kidney Precision Medicine Project (KPMP) and the European Nephrectomy Biobank (ENBiBA) project, will improve access to human diabetic kidney tissue for research purposes. Integration of diverse data domains from such initiatives including clinical phenotypic data, renal and retinal imaging biomarkers, histopathological and ultrastructural data, and an array of molecular omics (transcriptomics, proteomics, etc.) alongside multi-dimensional data from preclinical modelling offers exciting opportunities to unravel individual-level mechanisms underlying progressive DKD. The application of machine and deep learning approaches may particularly enhance insights derived from imaging and histopathological/ultrastructural data domains. KEY MESSAGES: Integration of data from multiple model systems (in vitro, animal models, and patients) and from diverse domains (clinical phenotypic, imaging, histopathological/ultrastructural, and molecular omics) offers potential to create a precision medicine approach to DKD care wherein the right treatments are offered to the right patients at the right time.

pH-sensing G protein-coupled orphan receptor GPR68 is expressed in human cartilage and correlates with degradation of extracellular matrix during OA progression.

Background: Osteoarthritis (OA) is a debilitating joints disease affecting millions of people worldwide. As OA progresses, chondrocytes experience heightened catabolic activity, often accompanied by alterations in the extracellular environment's osmolarity and acidity. Nevertheless, the precise mechanism by which chondrocytes perceive and respond to acidic stress remains unknown. Recently, there has been growing interest in pH-sensing G protein-coupled receptors (GPCRs), such as GPR68, within musculoskeletal tissues. However, function of GPR68 in cartilage during OA progression remains unknown. This study aims to identify the role of GPR68 in regulation of catabolic gene expression utilizing an in vitro model that simulates catabolic processes in OA. Methods: We examined the expression of GPCR by analyzing high throughput RNA-Seq data in human cartilage isolated from healthy donors and OA patients. De-identified and discarded OA cartilage was obtained from joint arthroplasty and chondrocytes were prepared by enzymatic digestion. Chondrocytes were treated with GPR68 agonist, Ogerin and then stimulated IL1ß and RNA isolation was performed using Trizol method. Reverse transcription was done using the cDNA synthesis kit and the expression of GPR68 and OA related catabolic genes was quantified using SYBR® green assays. Results: The transcriptome analysis revealed that pH sensing GPCR were expressed in human cartilage with a notable increase in the expression of GPR68 in OA cartilage which suggest a potential role for GPR68 in the pathogenesis of OA. Immunohistochemical (IHC) and qPCR analyses in human cartilage representing various stages of OA indicated a progressive increase in GPR68 expression in cartilage associated with higher OA grades, underscoring a correlation between GPR68 expression and the severity of OA. Furthermore, IHC analysis of Gpr68 in murine cartilage subjected to surgically induced OA demonstrated elevated levels of GPR68 in knee cartilage and meniscus. Using IL1ß stimulated in vitro model of OA catabolism, our qPCR analysis unveiled a time-dependent increase in GPR68 expression in response to IL1ß stimulation, which correlates with the expression of matrix degrading proteases suggesting the role of GPR68 in chondrocytes catabolism and matrix degeneration. Using pharmacological activator of GPR68, our results further showed that GPR68 activation repressed the expression of MMPs in human chondrocytes. Conclusions: Our results demonstrated that GPR68 was robustly expressed in human cartilage and mice and its expression correlates with matrix degeneration and severity of OA progression in human and surgical model. GPR68 activation in human chondrocytes further repressed the expression of MMPs under OA pathological condition. These results identify GPR68 as a possible therapeutic target in the regulation of matrix degradation during OA.

Does human homology reduce the potential immunogenicity of non-antibody scaffolds?

Biologics developers are moving beyond antibodies for delivery of a wide range of therapeutic interventions. These non-antibody modalities are often based on 'natural' protein scaffolds that are modified to deliver bioactive sequences. Both human-derived and non-human-sourced scaffold proteins have been developed. New types of "non-antibody" scaffolds are still being discovered, as they offer attractive alternatives to monoclonals due to their smaller size, improved stability, and ease of synthesis. They are believed to have low immunogenic potential. However, while several human-sourced protein scaffolds have not been immunogenic in clinical studies, this may not predict their overall performance in other therapeutic applications. A preliminary evaluation of their potential for immunogenicity is warranted. Immunogenicity risk potential has been clearly linked to the presence of T "helper" epitopes in the sequence of biologic therapeutics. In addition, tolerogenic epitopes are present in some human proteins and may decrease their immunogenic potential. While the detailed sequences of many non-antibody scaffold therapeutic candidates remain unpublished, their backbone sequences are available for review and analysis. We assessed 12 example non-antibody scaffold backbone sequences using our epitope-mapping tools (EpiMatrix) for this perspective. Based on EpiMatrix scoring, their HLA DRB1-restricted T cell epitope content appears to be lower than the average protein, and sequences that may act as tolerogenic epitopes are present in selected human-derived scaffolds. Assessing the potential immunogenicity of scaffold proteins regarding self and non-self T cell epitopes may be of use for drug developers and clinicians, as these exciting new non-antibody molecules begin to emerge from the preclinical pipeline into clinical use.

Development of IFNß-1a versions with reduced immunogenicity and full in vitro biological activity for the treatment of multiple sclerosis.

IFNß (recombinant interferon Beta) has been widely used for the treatment of Multiple sclerosis for the last four decades. Despite the human origin of the IFNß sequence, IFNß is immunogenic, and unwanted immune responses in IFNß-treated patients may compromise its efficacy and safety in the clinic. In this study, we applied the DeFT (De-immunization of Functional Therapeutics) approach to producing functional, de-immunized versions of IFNß-1a. Two de-immunized versions of IFNß-1a were produced in CHO cells and designated as IFNß-1a(VAR1) and IFNß-1a(VAR2). First, the secondary and tertiary protein structures were analyzed by circular dichroism spectroscopy. Then, the variants were also tested for functionality. While IFNß-1a(VAR2) showed similar in vitro antiviral activity to the original protein, IFNß-1a(VAR1) exhibited 40% more biological potency. Finally, in vivo assays using HLA-DR transgenic mice revealed that the de-immunized variants showed a markedly reduced immunogenicity when compared to the originator.

The Moon-Forming Impact and the Autotrophic Origin of Life.

The Moon-forming impact vaporized part of Earth's mantle, and turned the rest into a magma ocean, from which carbon dioxide degassed into the atmosphere, where it stayed until water rained out to form the oceans. The rain dissolved CO2 and made it available to react with transition metal catalysts in the Earth's crust so as to ultimately generate the organic compounds that form the backbone of microbial metabolism. The Moon-forming impact was key in building a planet with the capacity to generate life in that it converted carbon on Earth into a homogeneous and accessible substrate for organic synthesis. Today all ecosystems, without exception, depend upon primary producers, organisms that fix CO2 . According to theories of autotrophic origin, it has always been that way, because autotrophic theories posit that the first forms of life generated all the molecules needed to build a cell from CO2 , forging a direct line of continuity between Earth's initial CO2 -rich atmosphere and the first microorganisms. By modern accounts these were chemolithoautotrophic archaea and bacteria that initially colonized the crust and still inhabit that environment today.

Serpentinization as the source of energy, electrons, organics, catalysts, nutrients and pH gradients for the origin of LUCA and life.

Serpentinization in hydrothermal vents is central to some autotrophic theories for the origin of life because it generates compartments, reductants, catalysts and gradients. During the process of serpentinization, water circulates through hydrothermal systems in the crust where it oxidizes Fe (II) in ultramafic minerals to generate Fe (III) minerals and H2. Molecular hydrogen can, in turn, serve as a freely diffusible source of electrons for the reduction of CO2 to organic compounds, provided that suitable catalysts are present. Using catalysts that are naturally synthesized in hydrothermal vents during serpentinization H2 reduces CO2 to formate, acetate, pyruvate, and methane. These compounds represent the backbone of microbial carbon and energy metabolism in acetogens and methanogens, strictly anaerobic chemolithoautotrophs that use the acetyl-CoA pathway of CO2 fixation and that inhabit serpentinizing environments today. Serpentinization generates reduced carbon, nitrogen and - as newer findings suggest - reduced phosphorous compounds that were likely conducive to the origins process. In addition, it gives rise to inorganic microcompartments and proton gradients of the right polarity and of sufficient magnitude to support chemiosmotic ATP synthesis by the rotor-stator ATP synthase. This would help to explain why the principle of chemiosmotic energy harnessing is more conserved (older) than the machinery to generate ion gradients via pumping coupled to exergonic chemical reactions, which in the case of acetogens and methanogens involve H2-dependent CO2 reduction. Serpentinizing systems exist in terrestrial and deep ocean environments. On the early Earth they were probably more abundant than today. There is evidence that serpentinization once occurred on Mars and is likely still occurring on Saturn's icy moon Enceladus, providing a perspective on serpentinization as a source of reductants, catalysts and chemical disequilibrium for life on other worlds.

Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: A systematic review and meta-analysis.

OBJECTIVES: The aim of this study was to review available evidence for Type 1A (immediate implant placement and immediate loading) of single tooth replacement in the maxillary esthetic zone. MATERIALS AND METHODS: An electronic search was conducted utilizing the databases of MEDLINE, Embase, and Cochrane to identify publications reporting on the outcomes of Type 1A for single tooth replacement in the maxillary esthetic zone. The success and survival rates of the included articles were reported, which were further categorized according to the clinical criteria reported in Type 1A. Mean survival rates were univariately compared between risk groups and additionally between studies published before and since 2012 using bias-corrected and study size-weighed bootstrap tests. A study time-correcting meta-analysis was then performed to obtain an overall effect for the study pool. RESULTS: A total of 3118 publications were identified in the search, with a total of 68 articles included. A mean number of implants per study were 37.2 and mean follow-up was 2.8 years. All the included studies utilizing Type 1A report highly selective inclusion and exclusion criteria. Univariate risk group comparison determined that studies before 2012 report a significantly lower mean survival rate (difference of -1.9 percentage points [PP], 95% CI: [-0.3, -4.0], p = .02), facial gap dimension had an impact on survival rates (+3.1 PP [0.2, 5.3] for width >2 mm, p = .04), as well as presence of endodontic infection (+2.6 PP [0.9, 5.1], p = .004). CONCLUSIONS: Type 1A has a high survival rate in studies reporting strict patient and site selection criteria. Further research is required to assess esthetic and functional success with Type 1A treatments.

Group 5 ITI Consensus Report: Implant placement and loading protocols.

OBJECTIVES: Working Group 5 was convened to discuss and find consensus on the topics of implant placement and loading protocols associated with single missing teeth in the anterior maxilla (aesthetic zone). Consensus statements, clinical recommendations, patient perspectives and future research suggestions were developed and presented to the plenary for discussion and approval. MATERIALS AND METHODS: Two systematic reviews were developed and submitted prior to the conference. The group considered in detail the systematic reviews and developed statements, clinical recommendations, patient perspectives and future research suggestions based on the findings of the reviews and experience of group members. Definitive versions were developed after presentation to and discussion by the plenary. RESULTS: Five consensus statements were developed and approved from each systematic review. Twelve clinical recommendations were developed by the group based on both reviews and experience. Three patient perspectives were developed, and five suggestions made for future research. CONCLUSIONS: Based on the findings of the systematic reviews and experience of group members, the Type 1A protocol (immediate placement and immediate loading), when utilized in the anterior maxilla under favorable conditions, is considered predictable and is associated with high survival rates. The procedure is considered clinically viable and is associated with aesthetic outcomes, although surgical, technical, and biological complications can occur.